Zip HydroTap Domestic Boiling & Chilled, Boiling & Ambient And Boiling Only

Domestic Zip HydroTap

The most advanced boiling and chilled filtered water system yet.

Features

Benefits

Buy Zips Domestic Hydrotap Online From The Uk's Largest Zip Authorised Dealer

For more details and to buy online, please visit the Zip Hydrotap Domestic section on our main website or click on the links below
(Opens new window).

Zips Domestic Range Of Hydrotaps And Filtration

Zip Hydrotap DOMHB1 Chrome Zip Hydrotap DOMHB1S Satin Chrome Zip Hydrotap DOMHB1B Black Chrome Zip Hydrotap DOMHB1G Gold Chrome
Zip Hydrotap DOMBA1 Chrome Zip Hydrotap DOMBA1S Satin Chrome Zip Hydrotap DOMBA1B Black Chrome Zip Hydrotap DOMBA1G Gold Chrome
Zip Hydrotap DOMBC2 Chrome Split System Zip Hydrotap DOMBC2S Satin Chrome Zip Hydrotap DOMBC2B Black Chrome Zip Hydrotap DOMBC2G Gold Chrome
Zip Hydrotap DOMBC3 Chrome Zip Hydrotap DOMBC3S Satin Chrome Zip Hydrotap DOMBC3B Black Chrome Zip Hydrotap DOMBC3G Gold Chrome
Zip Hydrotap ZT004 Chrome Tap Font Zip Hydrotap ZT104 Satin Chrome Tap Font Zip Hydrotap ZT105 Black Chrome Tap Font Zip Hydrotap ZT106 Gold Chrome Tap Font
Zip Hydrotap FL1100KIT Zip FL1100 Replacement Filter

Boiling System

Open outlet, vented system designed to operate at 98˚C

Chilling System

Fan-cooled condenser type , chilling from 5-10°C. Refrigerant: R134A

Tap head

Chrome, Satin Chrome, Black Chrome or Gold plated tap with electronic controls, integral safety lock and LED indicators

Zip HydroTap Head

A choice of two programmable energy saving modes

Integral 24 hour 7 day timer enables the boiling and chilled water units to switch off automatically during known periods of inactivity e.g. overnight or weekends, but return to full functionality ahead of the next expected demand.

Inactivity Sleep Mode enables the boiling water unit to power down or switch off after 2 hours of non-use. Powering down allows the water temperature to gradually reduce to 65°C, at which it is maintained. Upon further draw off boiling resumes.

Undersink system

White corrosion resistant enamelled steel case with front access door and control panel

Installation

Location: Should be installed either on a suitable sink or on a Zip Tap Font. If installing on a sink, the tap should be mounted so that it will dispense into the sink.
The under-sink unit should be located, if possible, directly beneath the tap and not more than 1 metre away.

Plumbing: The water supply must be potable (drinkable). If static pressure exceeds 7 bar, a pressure reducing valve needs to be fitted. An isolating valve should be installed between the supply and the unit.

Venting: A vent in the HydroTap may discharge small amounts of water or steam, so the tap must be mounted where it can drain.

Ventilation-IMPORTANT: It is essential that the cupboard containing the undersink unit is adequately ventilated as poor air circulation will adversely affect the performance of the HydroTap. Cupboard doors must be offset all round using the 4mm buffers provided and the supplied vent fitted. If it is not possible to fit the vent in the cupboard door then consideration should be given to installing it in the side wall of the cupboard to dissipate heat to adjoining areas. Where limited ventilation is available it is strongly recommended that the optional auxiliary fan, ref: SP90651, is used. Supplied as standard on BC200//175+

Electrical: To be wired to a double pole fused spur, minimum break capacity of 13 amps. Installation must comply with current IEE regulations.

Caution: In some hard water areas where mineral scale accumulation may be an issue, consideration should be given to the maintenance required. We recommend the use of the Zip Professional FL1100 Scale Filtration System.

Warranty: 2 year on-site parts and labour. For full details visit www.zipheaters.co.uk/warranty

Which Model Do I Need?

Choose output type:

Zip Domestic HydroTap Specification

Contact Us Today

For more information give us a call on 01462 851103.